The Fuller Drive is a low to mid Overdrive with lots of dynamic and definition. It’s sensible and reacts very accurate to the guitar volume and how hard you hit the strings. It has the behavior of a good tube amplifier.
The Bass-Cut Switch reduces the Bass, for more definition when used with bigger amplifiers.
Drive and Volume are for Gain and Volume. They interactive to each other and work like Pre and Post Volume. The more Drive is set, the more it overdrives. If you want a clean or just a little overdrive in your signal, set the Drive to about 9o’clock and the Volume to about 3o’clock. For a saturated Overdrive set the Drive to about 4o’clock and the Volume to about 10o’clock.
When set to saturated Overdrive you can control the Overdrive with your volume pot on your guitar from clean to overdrive without touching the pedal.
The heart of the Fuller Drive is a discrete Circuit with FET-transistor. They’re personally selected, measured and fine adjusted.
The Fuller Drive is powered by 9V DC. I suggest a regulated 9V DC Adapter. It also runs with a 9V battery.
The Fuller Drive is available as a Standard Model with Silk-Screen printed design. On demand I offer special colors or custom etched enclosures.